熱系統 -美國Process Technology-高純度產品
熱交換器
串聯鐵氟龍熱交換器具有卓越的化學防腐蝕性而且可根據客戶的要求制作。不銹鋼螺旋板式熱交換器，不僅結構緊湊，而且熱交換效率卓越。本公司優秀的技術開發人員能夠研制出，適用于任何化學環境的各種熱交換器。如有特殊需求，歡迎定制。另外，我們的潛入式熱交換器有各種備選型號，包括材料和配置。
XC產品系列，串聯熱交換器
適于如下的串聯加熱或制冷，化學品和熱水、蒸氣 或冷水的熱交換。
The XC Series in-line fluoropolymer heat exchanger is designed for the most demanding chemical heating or cooling applications. Typical industries served include semiconductor， FPD， MEMS， and biomedical.
SPECIFICATIONS:
Service: In-line chemical heat exchanger with all fluoropolymer wetted surfaces (tubing side) for virtually any wet chemistry application.
Sizes:
1.5 ft2 (.14m2) of exchange area
2.5 ft2 (.23m2) of exchange area
3.5 ft2 (.33m2) of exchange area
Standard Features:
inch (12mm) heavy wall PFA tubing， .030" (.76mm) thick
All welded construction (shell)
inch (114mm) diameter polypropylene shell
Internally baffled for enhanced heat exchanger performance
"U" factor (depending on flow rate): 25-50 BTU/(hr x ft2 x 癋) = 142-284 J/(s x m2 x 癈)
Shell-side drain connection
Fluid Connections:
Fluid (tube): ?inch (12mm) male flare PFA
Shell: ?inch (19mm) male flare PFA
Shell drain: ?inch (6mm) male flare PFA
TherMax2 螺旋板式熱交換器
該產品結構緊湊、低碳不銹鋼構造，是理想的溶劑加熱/制冷的熱交換器。
Process Technology’s TherMax2 Heat Exchanger is a state-of-the-art in-line stainless steel exchanger for deionized water and process solutions. This revolutionary design is constructed of a 316L stainless steel jacket and spiral bundle. Internal silicon baffles and a dimpled spiral sheet route water in a rotating circular motion， resulting in high heat transfer (other baffle materials are available to suit your specific needs). The heat transfer surface of the TherMax2 enhances turbulence with low pressure drops， producing heat transfer rates 3 to 4 times that of tubular heat exchangers.
The all-welded construction provides not only long life， but easy installation as well. There are numerous applications for the unit including industrial， process system， cogeneration， solar， plating， electronics， commercial and industrial washers， evaporators/condensers， chillers， heat recovery， boilers (steam and water)， vapory recovery， and water heaters.
Features:
Innovative Design provides the most effective surface for all applications and the patented fabrication process maintains consistent， high quality production.
High Overall Heat Transfer - Enhanced turbulence with low pressure drops， and wetted perimeters 5 to 6 times that of equivalent tubular designs with heat transfer rates 3 to 4 times that of tubular heat exchangers.
TherMax2 Compact Modular Design makes for easy installation and servicing. Manifolding is simplified for larger applications. Heat loss is low， requiring little or no insulation.
Cylindrical Heat Exchanger of plate design using a dimpled heat transfer sheet， wound in a self-enclosed spiral.
TherMax2 All Welded Construction means no gaskets to fail. TIG welding is used on the sheet edge which separates Circuit A from Circuit B.
Low Internal Volume with maximum single circuit capacity at 76 fluid ounces (2.2 liters).
Material - 316L Stainless: Jacket thickness: 3.75 inch diameter models: .039 inches
2.75 inch diameter models: .032 inches
Surface thickness: 3.75 inch diameter models: .032 inches
2.75 inch diameter models: .020 inches
庫存和客戶定制的螺旋管，以及熱交換器
IT ALL BEGINS WITH A BETTER DESIGN
From simple "U"-coil configurations to custom designed， high-performance exchange vessels， Process Technology has been serving the heat exchange needs since 1978. We have the ability to supply both off-the-shelf and custom designed products under very tight deadlines.
FLUOROPOLYMER INLINE HEAT EXCHANGERS
For deionized water and acidic/alkaline aqueous solutions.
Capabilities:
Exchange Area: 1.25 - 5 square feet standard. Exchange areas up to 40 square feet available.
Features:
High performance design increases efficiency.
Integral inlet and outlet connections for easy installation.
Compact space-saving designs.
Chemically inert fluoropolymer coils ideal for high-purity service.
FEP (Fluorinated Ethylene Propylene) standard， maximum steam pressure 30 psi.
PFA (Perfluoroalkoxy Resin) available， maximum steam pressure 60 psi.
1/2 inch diameter fluoropolymer tubing with .030 inch wall improves circulation and reduces pressure drops.
Seals made of Viton standard， Chemraz， and PFA seals encapsulated with Viton available.
Low volume， fast response.
Choice of polypropylene， PVDF， fluoropolymer， or 316 stainless steel containment vessel.